...
Description: In this topic, the user will learn about business rules and how to enable them.Business Business rules are a way to validate, per service code, specific requirements mandated by that particular service. Currently, business rules can be set for hourly service codes, client transportation, vendor service codes, and vendor group service codes. There are many different hard-coded business rules in the system that can be enabled at the service code level to verify that punches meet organizational requirements. Some business rules contain parameters that allow the organization to input specific criteria for how the business rule should work.
Business rules can validate the punch in 1 of 3 phases:
Phase 1 - Punch Creation
If the punch fails a phase 1 business rule, the user creating the punch will receive an alert at the time they select Save or Clock Out.
The company's DCI portal or app settings may prohibit the user from saving a punch when a business rule has been violated. Contact a supervisor for assistance.
Phase 2 - After Punch Creation, Before Approval
If the punch fails a phase 2 business rule, the punch status will move from unvalidated to rejected.
The employee and supervisor or employer will receive a notification
Phase 3 - Punch Approval
If the punch fails a phase 3 business rule, the punch cannot be approved.
The punch must be rejected or edited to pass the business rule
For a complete list of business rules, view the article Business Rule List.
Role Required: Super User
Permission Required: N/A
Enable Business Rules
...
Log in to DCI with your personal profile
...
Select Settings from the main menu
...
Select Funding Sources from the submenu
...
Funding
...
Search for a Funding Source in the search box
...
Select Search and view the search results below the search box
...
Select the row of the Funding Source to view or edit by clicking anywhere in the row
...
The Funding Source Details page will open up, view funding source details
Scroll down on the details screen to ensure the Service Code tab is selected
Use the search criteria below Funding Source Details to find the Service Code that you wish to add Defaults for or scroll down to locate
Click anywhere in the row to open Service Code Details screen
...
Scroll down on the Service Code Details screen and click the Business Rules tab to display the Business Rule table
...
Click on the Business Rule you would like to enable to open the Business Rule Details screen
...
Click Actions
...
Click Edit Business Rule
...
Click the Enable Checkbox
...
Enter Parameters (optional depending on Business Rule)
...
Click Save
...
Click Yes to Confirm that you want to enable the business rule
Source Admin
| Table of Contents |
|---|
The enable column on the Business Rule table will now be updated to Yes. This table shows all business rules and their Enabled status, as well as, Phase and Parameter details.
Disable Business Rules
...
Log in to DCI with your personal profile
...
Select Settings from the main menu
...
Select Funding Sources from the submenu
View all Funding Sources listed below the search box
Search for a Funding Source in the search box
Select Search and view the search results below the search box
Select the row of the Funding Source to view or edit by clicking anywhere in the row
...
The Funding Source Details page will open up, view funding source details
Scroll down on the details screen to ensure the Service Code tab is selected
Use the search criteria below Funding Source Details to find the Service Code that you wish to add Defaults for or scroll down to locate
Click anywhere in the row to open Service Code Details screen
...
Scroll down on the Service Code Details screen and click the Business Rules tab to display the Business Rule table
...
Click on the Business Rule you would like to enable to open the Business Rule Details screen
...
Click Actions
...
Click Edit Business Rule
...
Click the Enable Checkbox to deselect the check box. Once the enable checkbox is deselected, the business rule will be disabled once saved.
...
Click Save
...
Business Rule Details
Each business rule contains the following:
Business Rule Name : - Name of Business Rulebusiness rule
Description : - Details regarding the specific business rule to be enforce
Enable : - Check the box to enable the business rule
To disable the business rule, deselect the checkbox
. Deselect to disable.
Phase - Phase: The point in which the system is going to check for the Business Rulebusiness rule
Parameter : - Integers or decimals specific to the functionality of that particular Business Rule
If parameters are available for a particular Business Rule, help text displays in the field
If no parameters are available then no further configuration is neededthe business rule
Phase Detail
Phase tells when the system will check for the business rule
Phase 1 - Occurs when the employee saves a punch in the web portal or at clock out in the mobile app
Phase 2 - Occurs between when a punch is saved and before it's available to be approved. The punch will become unvalidated.
Phase 3 - Occurs when a supervisor or employer approves the punch
When a Phase is Triggered
Phase 1 : - If a punch fails a Phase phase 1 business rule, the user will see an alert at Save or Clock Outwhen saving or clocking out.
Depending on the company’s organization's portal settings, the user may not be able to save their punch if it violates a business rule.
Phase 2 : - If a punch fails a Phase phase 2 scrubbusiness rule, it will either be rejected or moved to a pending status with a flag that it failed the business rule (depending on the parameter settings).
Phase 3 : - If a punch fails a Phase phase 3 scrubbusiness rule, the alert will occur at the time a supervisor or employer attempts to approve the punch.
The punch will either approve be approved with a warning, or it will be unable to be approved (depending on the parameter settings).
View Business Rule Results
- Select the punch to review
- View the punch via the employee's profile, the client profile, or pending entries from the submenu.
- The punch details page will open
- Select the Business Rules tab on the punch details page to view the business rule name and result (i.e., pass)
Parameter Setting
Parameter Setting
Parameters are integers Parameters are integers or decimals specific to the functionality of that particular Business Rulethe business rule. Not all Business Rules business rules require parameters. Only Business Rules business rules that require parameters will allow a user to enter text into the parameter field. Parameters fall into one of the following categories: None, Mode, ServiceCodeID, GroupID, Max# and Max Hours
...
six categories outlined below.
- None
- When a business
...
- rule does not have a parameter, the
...
- field is grayed out.
...
- Select the enable checkbox
...
- then
...
- Save to enable the business rule
...
...
- Mode
...
- Only applies to authorization related business rules
...
- :
- Mode 1 - Hard stop, meaning the punch will be rejected or not able to be approved if it fails the business rule.
- When
- Mode 1 - Hard stop, meaning the punch will be rejected or not able to be approved if it fails the business rule.
- :
...
- the system checks for this
...
- business rule, if the punch violates the rule
...
- , it will be rejected.
- Mode 2 - Soft stop, meaning the user and the punch approver will be notified, but the punch can still be saved and approved. In mode 2, anything punched over the limit is unbillable.
Parameter Setting – ServiceCodeID
...
- When the system checks for this business rule, if the punch violates the rule, the system will provide an alert message for the user to acknowledge the violation before saving the punch.
- Only applies to Authorization Weekly Max Threshold Alert, Authorization Monthly Max Threshold Alert, and Authorization Remaining Balance Threshold Alert business rules:
- Parameter 1 - Percentage of threshold as an integer
- Parameter 2 – Mode 1 (displays warning to approver) or 2 (does not display warning to approver)
Service Code ID - Service Code ID the system will use when rule
...
is enabled. The IDs are located in the
...
service code report.
- Access the report:
- Access the report:
...
Sign in to your Personal Profile
...
Click the Reports tab on the main menu
...
Hover over Settings Report on the submenu the click Service Code Report on the flyout menu
...
Filter the search by entering the Funding Source where that service code is located in the search bar then select Search
...
Find the Service Code you wish to enable the Business Rule for and in the column directly to the left you will see Service Code ID
- Log in with personal profile
- Select Reportsfrom the main menu
- Select Settings Reportsfrom the sub menu
- Select Service Codes Reportfrom the flyout menu
- Use filters by entering the funding source then click Search
- Locate the service code and view Service Code ID in the third column
- Enter this ID into the parameter for the business rule being enabled
- An example of this is the Duplicate and Overlapping Employee Punch business rule.
...
- When a service code ID is entered in the parameter field, employee punches against this service code can overlap with punches against the service code in the parameter field.
...
- Enter one or two service codes. If more service codes should be specified, use the corresponding Service Code Group Business Rule.
Parameter Setting – GroupID
Service Code Group ID - Group
...
ID the system will use
...
when rule is enabled. The IDs are located in the
...
service code group report.
- Access the report:
- Access the report:
...
Sign in to your Personal Profile
...
Click the Reports tab on the main menu
...
Hover over Settings Report on the submenu the click Service Code Group Report on the flyout menu
...
Filter the search by entering the Funding Source where that service code is located in the search bar then select Search
...
Find the Service Code you wish to enable the Business Rule for and in the column directly to the left you will see Group ID
- Log in with personal profile
- Select Reportsfrom the main menu
- Select Settings Reportsfrom the sub menu
- Select Service Code Groups Reportfrom the flyout menu
- Use filters by entering the group name, or simply click Search
- Locate the service code group and view Group ID in the first column
- Enter this ID into the parameter for the business rule being enabled
- An example of this is the Duplicate and
...
- Overlapping Client Punch business rule. When a service code ID is entered in the parameter field,
...
- client punches made against this service code will be allowed to overlap with client punches made against any of the service codes from the GroupID listed in the parameter.
...
Max#
...
- This business rule will enable
...
a max number
...
that something can occur
...
(e.
...
g., max days
...
)
Enter an integer (whole number) that represents the maximum number of days allowed between
...
date of service
...
and
...
date
...
punch was created
...
Max Hours -
Parameter Setting – MaxHours
This business rule will enable
...
a max
...
number of hours for specific scenarios including:
...
- Day per employee per funding source
- Week per employee per funding source
- Week per employee per cost center
- Week per client per unrelated employee (FI Mode Only)
- Week per client per kinship employee (FI Mode Only)
- Week per client per live-in caregiver (FI Mode Only)
Enable Business Rules
Log in with personal profile
Select Settings from the main menu
Select Funding Sources from the submenu
Use filters to enter parameters and click Search
Click anywhere in the selected funding source row to view the details page
Scroll down and click the Service Codes tab
Use filters to locate a specific service code
Click anywhere in the service code row to view the details page
Scroll down and click the Business Rules tab to display the business rule table
Select a Business Rule to open the details page
Click Actions
Select Edit Business Rule from the drop-down menu
Click the Enable Checkbox
Enter Parameters (optional depending on business rule)
Click Save
Click Yes to confirm
The enable column on the business rule table will now be updated to Yes. This table shows all business rules and their status, as well as phase and parameter details.
*Please note: The Authorization Remaining Balance business rule for Group Services is hard coded to mode 1 (hard stop) and cannot be edited
View Business Rule Results
Select the punch to review
View the punch via the employee's profile, the client profile, or pending entries from the submenu.
The punch details page will open
Select the Business Rules tab on the punch details page to view the business rule name and result (i.e., pass)
Disable Business Rules
Log in with personal profile
Select Settings from the main menu
Select Funding Sources from the sub menu
Use filters to enter parameters and click Search
Clink anywhere in the selected funding source row to view details page
Scroll down and click the Service Code tab
Use filters to locate a specific service code
Click anywhere in the service code row to view details page
Scroll down and click the Business Rules tab to display the business rule table
Select a Business Rule to open the details page
Click Actions
Select Edit Business Rule
Click the Enable Checkbox to deselect the check box
Click Save
Click Yes to confirm
Override Business Rules
*Please note: This is an instance-level setting and currently only available for the phase 1 business rule Timely Filing Employees Punch Entry. If enabled, it allows an override of this business rule failure via web portal punch entry and import.
Enable Business Rule Override
Log in to DCI
Select Settings from the main menu
Select Funding Sources from the submenu
Use filters to search for funding source and click Search
Click anywhere in the funding source row to open
Scroll down the page and select the Service Codes tab
Click anywhere in the service code row to select it
Scroll down and click the Business Rules tab to display the business rule table
Select the Timely Filing Employees Punch Entry business rule to open the details page
Click Actions
Select Edit Business Rule from the drop-down menu
Click the Enable checkbox
The fields Allow Override and Parameter 1 are now editable
Click the Allow Override checkbox
When enabled, super users can override failure of this business rule.
The radio buttons for the Require Note field are now available
Select Yes or No on the Require Note field
If Yes, super users are required to enter a note when overriding failure of this business rule.
Enter Parameter 1
Max # of days between punch creation and punch date of service
Click Save
Click Yes to confirm
Allow Override and Require Note settings are visible on the Business Rule tab on the Service Code Details page and are included in the Business Rules Settings Report.
Override via Web Portal Punch Entry
When a super user creates a punch from the Employee Details page, the Client Details page, or the Service Account Details page that violates the business rule, they receive an alert. If an override note is required, it includes a field for the user to enter the note.
When the Confirm button is clicked and the punch is added, the Events tab on the punch entry detail page records an event called “Business Rule Override." The Business Rules tab shows a Timely Filing Employees Punch Entry failure. If an Override Note was entered, it displays on the Notes tab.
Override via Import
Use the Import Formats - Admin Guide article to enter the correct column headers on the top row of an Excel spreadsheet
Complete the spreadsheet with relevant information to be imported
Save the Excel file as a Text Tab Delimited (.txt) file
Log in to DCI with the appropriate profile
Click Import on the main menu
Select Entries on the submenu
Select Employee Entries from the flyout menu
Click Actions
Select Upload File from the drop-down
Click the blue Upload tab delimited TXT file link
Choose the prepared Text file and click Open to upload
If the import file has incorrect or missing column headers, the user will see a red bar and an error message. The file will need to be corrected before it can be uploaded.
Select the Override Business Rules checkbox
The Override Note field becomes available
Add an Override Note. If this is a required field, it must be entered to Save.
Please note: All punches created by the import will have the same override note saved. The note is visible on the Punch Entry Details page on the Notes tab.
Click Save
A confirmation alert appears which includes the number of items to be imported along with a statement alerting users that the override will be applied for all entries in the file and cannot be undone.
Click Yes to acknowledge
Click OK to acknowledge that the import has started
The import process will run in the background. If the Import Completed message template is enabled, the user may receive an email, text message (if mobile was verified), or both stating that the import was complete.
Click on the Events tab to view the new event "Import was started with business rule override applied"
Click on the Attachments tab to view the results file
Locate the file name
Click the download icon
Open the downloaded .txt file to view results
Status shows Success
Import Reason shows the business rule failure with override enabled
The Events tab for the punch entry records the event called "Business Rule Override." Individual entries record a business rule failure event
Enter the max hours specific to:
Day per Employee per Funding Source
Week per Employee per Funding Source
Week per Employee per Cost Center
Week per Client per Unrelated Employee (FI Mode Only)
Week per Client per Kinship Employee (FI Mode Only)
Week per Client per Live-in Caregiver (FI Mode Only)
These are just some examples. A complete list of Business Rules is available for download in our help center.
Related articles
| Content by Label | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
...