Page History

...

Contents:

Available Actions by Entry Status

...

*Please note: In FI Mode, Employer is equivalent to Supervisor throughout this document.                       

Additional Notes

• *Pending residential and day program entries cannot be edited by the employee. All other types of entries can be edited by the employee while in pending status.
• When a pending entry is edited, two entries are created:
  • The original entry moves to a rejected status
  • The new (reference) entry reflects the correct shift and has a status of unverified
• When an entry is canceled, a new entry for a negative amount that zeroes out the original entry is created and is automatically approved. Both the canceled entry and the reference entry show an approved status.
• When an entry that spans 2 days (crosses midnight) is approved, the following occurs:
  • The original entry is canceled
  • Two new entries are created in the Approved status
    • One entry for the first date, ending at midnight
    • One entry for the second date, starting at midnight

...

1. Log in to DCI with personal profile
2. Click Home on the main menu
3. Click Pending Entries onthe submenu
   1. The number of Pending Entries will display on the submenu in brackets - i.e., Pending Entries (10). This alerts users to pending entries that require attention.
4. Use the filters to search for a pending entry and click Search
5. Locate the punch in the entries table
6. Entry table columns:
   1. Approve - Click A to approve or the red R to reject
   2. Punch ID - Number that is hyperlinked to the punch details page
   3. Service Date
   4. Start Time
   5. End Time
   6. Cost Center
   7. Client/Program Name – Name that is hyperlinked to the client or program details page
   8. Employee/Program Name – Name that is hyperlinked to the employee or program details page
   9. Service Code/Type – Type of service (i.e., group service, vacation, hourly, etc.)
   10. Amount – Amount of service in units
   11. EVV – Yes, no, or N/A
   12. Needs Review – If the entry needs review, this column will display a gray ? or a red Eye
       1. Hover over the icon to view the violation
       2. Typical violation examples include portal sign-off pending, a business rule violation, EVV failure, geofencing failed, or schedule deviation.
       3. Scroll down to the Manage Pending Entries Needs Review section of this guide for additional information
   13. Click anywhere in the entry row to view the punch detail page
       1. View widgets regarding the punch:
          1. Punch Details
          2. Account Details/Service Account
          3. EVV Details
          4. Reason Codes
       2. Click the tabs to view additional punch details such as:
          1. Reference Entries – Entries associated with the pending entry
          2. Notes and Attachments –Images associated with client attestation
          3. History

Export Pending Entries

1. Log in to DCI with personal profile
2. Click Home on the main menu
3. Click Pending Entries onthe submenu
4. The number of Pending Entries will display on the submenu in brackets - i.e., Pending Entries (10). This alerts users to pending entries that require attention.
5. Export entries by clicking the Export button above the entries table on the right-hand side of the page
   1. If no search criteria are defined, all pending entries in the table will be exported.
   2. If search criteria are defined, only the entries in the search criteria will be exported.
6. Open the .csv file from the device downloads
7. Excel will open
8. Sort and format downloaded data as needed

Manage Pending Entries Needs Review

1. Log in to DCI with personal profile
2. Click Home on the main menu
3. Click Pending Entries onthe submenu
   1. The number of Pending Entries will display on the submenu in brackets - i.e., Pending Entries (10). This alerts users to pending entries that require attention.
4. If an entry needs review, the Needs Review column will display a gray ? or a red Eye
   1. Gray ? – review the needs review column for the warning, determine the action to take on the punch
   2. Red Eye icon – Action is required prior to approving the punch, review the needs review column
5. Choose Review Needed from the drop-down in the Select Review filter to search for pending entries needing review
6. OR sort all pending entries by clicking on the Needs Review column header so that entries needing review sort to the top
7. Hover over the red-eye icon to view the violation
8. Typical violation examples include a business rule violation, EVV failure, geofencing failed, or schedule deviation.
9. Click anywhere in the entry row to view the punch detail page
10. If the error is Unverified Signature, Picture, or Voice, click the Verifications tab
    1. Click the attachment link to open and compare
    2. Click A to approve the verification or the red R to reject the verification
    3. Please note: While the verification has been approved and the issue resolved, the punch must still be approved.
11. Schedule deviation errors can simply be approved or rejected
12. Click Actions
13. Choose from the following to act and remove the Needs Review flag:
    1. Sign Off
    2. Approve
    3. Reject
    4. Edit Entry

Approve Pending Entries

1. Log in to DCI with personal profile
2. Click Home on the main menu
3. Click Pending Entries onthe submenu
   1. The number of Pending Entries will display on the submenu in brackets - i.e., Pending Entries (10). This alerts users to pending entries that require attention.
4. Use the filters to search for a pending entry and click Search
5. Locate the punch in the entries table
6. Click A to approve
   1. Click Yes to confirm
7. Alternatively, click anywhere in the entry row to view the punch detail page
   1. Click Actions
   2. Select Approve from the drop-down menu
   3. Click Yes to confirm

Reject Pending Entries

1. Log in to DCI with personal profile
2. Click Home on the main menu
3. Click Pending Entries onthe submenu
   1. The number of Pending Entries will display on the submenu in brackets - i.e., Pending Entries (10). This alerts users to pending entries that require attention.
4. Use the filters to search for a pending entry and click Search
5. Locate the punch in the entries table
6. Click the red R to reject
   1. Click Yes to confirm
7. Alternatively, click anywhere in the entry row to view the punch detail page
   1. Click Actions
   2. Select Reject from the drop-down menu
   3. Click Yes to confirm

Edit Pending Entries   

Description: Supervisors may correct/edit an employee’s pending punch entry. Some conditions under which a supervisor might make such changes include:

...

Once approved, the approved or rejected entry will disappear from the Pending Entries screen and be shown under Entries for the program, or individually under Entries for the employee or client. 

Auto Approval (Instance-Level Setting)

Description: Auto approval and frequency is an instance-level setting that the organization may enable. Pending entries that meet the criteria for auto approval will approve without a supervisor or employer manual approval when that process runs and will drop off of the pending entries list. Entries that do not meet the criteria would remain in pending status for review by the supervisor or employer.

...

• If any of the business rules fail, the punch entry will fail auto approval.
  • Authorization business rule if enabled in mode 2
    • Authorization Daily Max
    • Authorization Weekly Max
    • Authorization Monthly Max
  • Max Hours Per Week Per Employee

Punch Entries by Employee

Description: Supervisors may search, view, manage, and export employee punch entries using the Employee submenu tab.

Search Entries

1. Log in to DCI with personal profile
2. Click Home on the main menu
3. Click Employees on thesubmenu
4. Use the filters to search by any of the following:
   1. Employee Name
   2. Cost Center
   3. Employee Number
   4. Employee Type – Select from drop-down
   5. State – Select from drop-down
   6. Status – Select from drop-down
5. Click Search
6. Select the row in the entries table by clicking anywhere in the employee row to open the employee details page
7. Click the Entries tab
8. Click anywhere in the punch row on the entries table to open the punch details page
9. Use the filters to search for a specific employee entry. Search by any of the following:
   1. Date Range
   2. Punch ID
   3. Client Name
   4. Service Code
   5. Account Type – Select from drop-down
   6. Status – Select from drop-down
10. Click Search
11. Locate the punch in the entries table or sort results by clicking on a column header

View Entries

1. Log in to DCI with personal profile
2. Click Home on the main menu
3. Click Employees on thesubmenu
4. Use the filters to search by any of the following:
   1. Employee Name
   2. Cost Center
   3. Employee Number
   4. Employee Type – Select from drop-down
   5. State – Select from drop-down
   6. Status – Select from drop-down
5. Click Search
6. Select the row in the entries table by clicking anywhere in the employee row to open the employee details page
7. Click the Entries tab
8. Click anywhere in the punch row on the entries table to open the punch details page
9. Use the filters to search for a specific employee entry. Search by any of the following:
   1. Date Range
   2. Punch ID
   3. Client Name
   4. Service Code
   5. Account Type – Select from drop-down
   6. Status – Select from drop-down
10. Click Search
11. Locate the punch in the entries table or sort results by clicking on a column header
12. Entry table columns:
    1. Id – Number that is hyperlinked to the punch details page
    2. Service Date
    3. Start Time
    4. End Time
    5. Account Type
    6. – Number that is hyperlinked to the original entry (if the punch was edited)
    7. Cost Center
    8. Client/Program Name – Name that is hyperlinked to the client or program details page
    9. Service Code
    10. Amount – Amount of service in units
    11. Status
13. Click anywhere in the entry row to view the punch detail page
    1. View widgets regarding the punch:
       1. Punch Details
       2. Account Details/Service Account
       3. Client Details
       4. Employee Details
       5. EVV Details
       6. Reason Codes
       7. Statements
    2. Click the tabs to view additional punch details such as:
       1. Reference Entries – Entries associated with the pending entry. The 5^th column (Ref.) is the original punch number. The 2^nd column (Id) is the new entry number.
       2. Notes and Attachments – Images associated with client attestation
       3. Business Rules – Displays business rule(s) associated with the entry
       4. History

Export Entries

1. Log in to DCI with personal profile
2. Click Home on the main menu
3. Click Employees onthe submenu
4. Use the filters to search by any of the following:
   1. Employee Name
   2. Cost Center
   3. Employee Number
   4. Employee Type – Select from drop-down
   5. State – Select from drop-down
   6. Status – Select from drop-down
5. Click Search
6. Export entries by clicking the Export button above the entries table on the right-hand side of page
   1. If no search criteria are defined, all entries in the table will be exported.
   2. If search criteria are defined, only the entries in the search criteria will be exported.
7. Open the .csv file from the device downloads
8. Excel will open
9. Sort and format downloaded data as needed

Approve Entries

1. Log in to DCI with personal profile
2. Click Home on the main menu
3. Click Employees onthe submenu
4. Use the filters to search by any of the following:
   1. Employee Name
   2. Cost Center
   3. Employee Number
   4. Employee Type – Select from drop-down
   5. State – Select from drop-down
   6. Status – Select from drop-down
5. Click Search
6. Click anywhere in the entry row to view the punch detail page
7. Click Actions
   1. Select Approve from the drop-down menu
   2. Click Yes to confirm

Reject Entries

1. Log in to DCI with personal profile
2. Click Home on the main menu
3. Click Employees onthe submenu
4. Use the filters to search by any of the following:
   1. Employee Name
   2. Cost Center
   3. Employee Number
   4. Employee Type – Select from drop-down
   5. State – Select from drop-down
   6. Status – Select from drop-down
5. Click Search
6. Click anywhere in the entry row to view the punch detail page
7. Click Actions
   1. Select Reject from the drop-down menu
   2. Click Yes to confirm

Search, View, Manage, and Export all Entries by Object

1. Log in to DCI with personal profile
2. Click Home on the main menu
3. Click one of the following tabs on thesubmenu to open the object page:
   1. Employees - All entries for a particular employee
   2. Clients - All entries for a particular client
   3. Residential Programs, Day Programs, Group Services, or Parenting Programs - Only punches for these programs or group service will appear on these pages. This excludes punches not made within the program or group service such as Training, Administration, Hourly, etc.
   4. Cost Center - All entries for a particular cost center
4. Use the filters to search by specific criteria and click Search
5. Select the row in the entries table by clicking anywhere in the row of the object (employee, client, program or group, or cost center) to open the object details page
6. Click the Entries tab
7. Click anywhere in the punch row on the entries table to open the punch details page
8. Click Actions
9. Select Approve or Reject from the drop-down menu
10. Click Yes to confirm
11. Export entries by clicking the Export button above the entries table on the right-hand side of the page
    1. If no search criteria are defined, all pending entries in the table will be exported.
    2. If search criteria are defined, only the entries in the search criteria will be exported.
12. Open the .csv file from the device downloads
13. Excel will open
14. Sort and format downloaded data as needed

Manage Punch Entry for Employee

Description:  In this topic, the supervisor will learn how to add or edit employee punches for those they supervise. The best practice is for employees to enter and edit their punches, however, some situations require supervisor assistance (i.e., missed punches for Residential or Day Programs; approved punches that require editing, etc.).

Add a New Punch for an Employee

1. Log in to DCI with personal profile
2. Click Home on the main menu
3. Click Employees on the submenu
4. Enter the employee name in the Employee Name field then click Search
5. Click anywhere on the row to open the employee details page
6. Click Actions
7. Select New Entry to complete the form wizard
   1. Entry Type is automatically set to Punch and the Employee Name field contains the employee’s name
   2. From the Account Type menu, select the type of punch.
   3. The remaining fields will display the information that must be entered for the account type selected.
8. Click Save and Yes to confirm

The punch appears in the employee’s entries list with a status of Unverified. The employee must verify the punch, which updates the status to Pending. The supervisor may then review and approve the pending entry.

Edit a Punch for an Employee

1. Log in to DCI with personal profile
2. Click Home on the main menu
3. Click Employees on the submenu
4. Enter the employee name in the Employee Name field then click Search
5. Click anywhere on the row to open the employee details page
6. Select the Entries tab located below the demographics box
7. Click anywhere in the row to open the punch details page
8. Click Actions
9. Select Edit Entry from the drop-down menu
10. Make the necessary changes on the Entry Form wizard
11. If the organization requires a reason code when editing a punch, click the blue Plus (+) Sign next to the reason field
12. Select a reason from the Add Reason Codes drop-down that best describes why the edit is being made
13. Reason codes may require a text explanation. If this requirement is selected, a text box will appear where text must be entered.
14. Click the blue Plus (+) Sign next to the Add Reason Codes drop-down to add the selection to the Added Reason Codes box
15. Click Save and Yes to confirm

...

An edited approved punch will maintain the status of approved but will reflect a Compensated flag. Two new punches are created and need to be approved; one that zeroes out the original entry, and one for the correct entry. These entries can be found on Pending Entries on the submenu or in the reference entries table on the original entry’s punch entry details page. The Ref field is assigned a number that references the original punch, indicating the punch has been modified.

Cancel a Punch for an Employee

1. Log in to DCI with personal profile 
2. Click Home on the main menu 
3. Click Employees on the submenu 
4. Enter the employee name in the Employee Name field then click Search
5. Click anywhere on the row to open the employee details page
6. Select the Entries tab located below the demographics box
7. Click anywhere in the row to open the punch details page
8. Click Actions
9. Select Cancel Entry from the drop-down menu to open the Cancel Entry form
10. If the organization requires a reason code when canceling a punch, click the blue Plus (+) Sign next to the reason field
11. Select a reason from the Add Reason Codes drop-down that best describes why the edit is being made
12. Reason codes may require a text explanation. If this requirement is selected, a text box will appear where text must be entered.
13. Click the blue Plus (+) Sign next to the Add Reason Codes drop-down to add the selection to the Added Reason Codes box
14. Click Save and Yes to confirm 

The updated employee punch remains in Approved/Processed/Paid status but will reflect a Compensated flag. A new entry zeroing out the original has been created. The Ref field is assigned a number that references the original punch indicating the punch has been modified.  

Verify an Unverified Punch for an Employee

Description: As an alternate option to the employee verifying an unverified punch, some organizations may allow a supervisor to verify (or reject) the punch from the punch details screen on behalf of the employee.

...