You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Next »

Purpose: Contains troubleshooting steps for a wide variety of issues staff may come across related to entering time in Mainframe or looking at entries in OR PTC DCI, as well as issues the provider reported.

Outcome: Staff understand how to troubleshoot issues they come across.

Disclaimer

The content found in this document is intended for staff using the OR PTC DCI system.

Below you will find common scenarios and steps to follow when troubleshooting for each scenario.

Issues When Entering Time in Mainframe

Staff may come across issues when entering time and mileage into Mainframe from OR PTC DCI. As we continue to develop connections between these systems and automate the information sharing, staff will need to monitor and/or correct data.

Voucher on Batch is Voided

A line, representing an entry, on a batch pulled from OR PTC DCI either correlates with a voucher that has been voided in Mainframe or does not match a voucher at all in Mainframe.

Questions to ask yourself during this troubleshooting:

  1. Does the consumer/provider combination have a voucher in Mainframe?
  2. If there is not a voucher in Mainframe, check for a narration or 546 indicating there should be a voucher.
  3. Is the voucher number in Mainframe different from the voucher number in OR PTC DCI for the same timeframe?

Entry on a Batch is Missing a Voucher Number

A line, representing an entry, on a batch pulled from OR PTC DCI is missing a voucher number.

Steps to troubleshoot this issue:

  1. Look up the voucher for the consumer/provider combination in Mainframe for the appropriate pay period.
  2. Compare voucher details in Mainframe with correlating authorization in OR PTC DCI to ensure you have the correct authorization.
  3. Update the “Authorization ID Reference” field in the OR PTC DCI authorization to be the correct voucher number found in Mainframe.

Issues with Entries in OR PTC DCI

Staff may come across issues when reviewing time and mileage entries in OR PTC DCI and working the pending entries process.

The Provider is Over Hours

This situation involves the provider being over their authorized hours.

A high-level overview of what to do is below. For more details, please see the business process 2.12.0 Provider Goes Over Authorized Hours or see Time Entry Management.

  1. Does time entered in STIM match the total hours in the Payroll Batch?
  2. Is there a narration or 546 authorizing additional hours that was not processed?
  3. Work with case manager to see if additional hours need to be authorized.
  4. If no additional hours are authorized, the entry/entries need to be corrected.

Not all Time is Entered into STIM

Only some time has been entered into STIM, meaning there will be more entries and/or mileage on a future payroll batch for this same voucher that will need to be put into Mainframe for payment.

To add the additional entries and/or mileage:

  1. On STIM, press F9 to save the voucher in a 30 status.
  2. Once all time for this voucher has been entered, go to the STIQ screen to process the voucher.
  3. Mark the voucher you would like to pay with an ‘S’ and press enter. This takes you to HPAY where you can complete the process.

More Entries for a Voucher in 35 Status

A voucher is in ready-to-pay status (35), but more time entries or mileage must be added to it.

To add additional entries and/or mileage:

  1. On the HPAY screen, key “E” at “Trans Type” and press Enter.
  2. At the bottom of the screen, the system will ask “Erase/Cancel Payment?” Key “Y” and press enter.
  3. When you change the pay status back to 30, it will automatically change the end date back to the original end date.

Data Integrity – What to do When Data Doesn’t Match

There are many situations where information needs to be updated in both OR PTC DCI and Mainframe. Detailed procedures for ensuring these updates are made may vary across local offices. However, the situations where this must occur remain consistent. Below is a list of these situations:

Provider Reports an Issue

Provider Says There are no Hours Authorized in OR PTC DCI

  1. Check Oregon Access (OA) to see if they have a service plan.
    1. There must be an approved benefit plan in OA for an authorization to be issued in DHR and OR PTC DCI. If there is not a service plan, an active benefit needs to be approved. Update the service plan and complete a 546 for processing.
    2. If there is an active service plan, continue to step 2.
  2. Check the HINQ screen in Mainframe to ensure there is an active authorization for the pay period in question.
    1. If there is no authorization, a 546 needs to be processed by the local office. In this case a service plan does exist but a 546 was never completed or processed so that is why there is no active authorization in Mainframe or vouchers generating in Mainframe.
    2. If there is an active authorization, continue to step 3.
  3. Check to see if the authorization exists in OR PTC DCI. You can do this in a few separate ways, via the consumer’s profile, the Authorization tab, or the Authorization section on the dashboard.
    1. Via the Client Profile under Entries:
      1. From the consumer’s profile, scroll down until you see Entries.
      2. From the Select Type dropdown, select Authorization.
      3. Optional: Enter From and To dates for which the authorizations shown will start and end.
      4. Click Search.
      5. This will show all authorizations for this consumer in the system. You can use the service code to determine which provider the authorization is for.
      6. If you have the Authorization Admin Permissions, click on the Id of an authorization to see more information. This will show authorization information.
    2. Via the Authorization Tab:
      1. Click Authorization at the top of the screen.
      2. Click Authorizations on the left.
      3. Enter the consumer’s name and click Search.
      4. Click on the authorization in question. The Authorization ID Reference column lists the voucher number. You can use this to identify the authorization.
      5. This will display all authorization information:
        1. Start and End Date
        2. Initial Balance for the voucher
        3. Voucher Number
        4. Provider Number
      6. Via Authorization section of dashboard:
        1. Type in the consumer’s name and search to see the authorization for the current pay period.
      7. If there is not an approved authorization with the correct dates, hours, and service code then the provider will be unable to clock in and out. Staff should email the PTC Support Team at Support@odhsoha.oregon.gov for assistance with creating authorization.
      8. If the provider is still experiencing issues but there is an active authorization in OR PTC DCI, email the PTC Support Team at Support@odhsoha.oregon.gov for assistance.

Authorizations originate in Oregon Access with an approved benefit. Once the benefit is approved in OA, staff need to send a 546 to the Voucher Team for processing in Mainframe. Once there is an active voucher authorization in Mainframe (30 status), those authorization are pulled into OR PTC DCI. For new consumer/provider pairings, it takes 2 full business days for the authorization to appear in OR PTC DCI. For ongoing consumer/provider pairings, the authorization will immediately appear in OR PTC DCI once the authorization is created in Mainframe for pay period that are less than 8 days away. For pay period further than 8 days away, they will be sent to OR PTC DCI once the pay period is 8 days away.

Provider Reports they Cannot Enter Mileage but Can Enter Hours

  1. Check Oregon Access (OA) to see if there is an active service plan with mileage.
    1. If there is no mileage authorized in OA, there is no authorization in OR PTC DCI. Update the service plan to include mileage and complete a 546 for processing.
    2. If there is mileage on the active service plan, go to step 2.
  2. Check the HINQ screen in Mainframe to make sure there is an active authorization that includes mileage.
    1. If there is no mileage authorization in Mainframe, the unpaid authorization needs to be voided and reissued by the local office to include mileage. Send a 546 to be processed for this to occur. Then OR PTC DCI will need to be updated per the process in Updating an Authorization.
    2. If there is an active authorization that includes mileage, go to step 3.
  3. Check the authorizations in OR PTC DCI mileage to see if there is a mileage authorization. This can be done via a few different methods: Entries under the Client Profile, Authorization tab, the Authorizations section on the dashboard. You can find screenshots and instructions for each of these in the Provider Says There are no Hours Authorized in OR PTC DCI section of this document.
  4. If there is not an approved authorization with the correct dates, mileage, and service code, the provider will be unable to claim mileage. Staff should email the PTC Support Team for assistance with creating mileage authorization.
  5. If the provider is still experiencing issues but there is an approved authorization in OR PTC DCI, email the PTC Support Team at Support@odhsoha.oregon.gov for assistance.

Service Authorizations originate in Oregon Access with an approved benefit. Once the benefit is approved in OA, staff need to send a 546 to their voucher team for processing in Mainframe. Once there is an active voucher authorization in Mainframe (30 status), those authorizations are pulled into OR PTC DCI.

Provider Reports They Have Not Been Paid

This situation entails a provider reporting they have not been paid. However, the authorization was approved, and they may have successfully created entries in OR PTC DCI.

Steps to identify the issue:

  1. Check OR PTC DCI for entries to ensure time and/or mileage was entered correctly.
    1. Navigate to the provider’s Employee Profile.
    2. Scroll down to see Entries.
    3. You may choose to filter their entries by consumer and/or pay period dates (using the start and end dates) to make it easier to identify the entries they were not paid for.
    4. If you do not see any entries in OR PTC DCI, instruct the provider that they must enter their time to be paid.

    5. If there are entries in OR PTC DCI, continue to step 2.
  2. While still looking at the Entries, click each entry. Best practice is to open them in a new tab. To do this: right click on the Entry Id, and click Open Link in New Tab.
    1. On the Entry Details screen, compare the Created Date to the submission deadline for the pay period in question.
    2. If the entries were all created after the submission deadline, this explains why the provider was not paid. Inform the provider of deadlines for entering their time in order to be paid timely. These entries can be pulled into the next batch and paid.
    3. If the entries were all created before the submission deadline, continue to step 3.
  3. In Mainframe, check the status of the authorization for the pay period in question to determine if the voucher was paid or not.
    1. If the authorization is in a status of 10, look for another authorization for the same pay period.
      1. If you find another authorization, it means OR PTC DCI was not updated when the authorization was voided and reissued. Follow instructions in Updating an Authorization to update the voucher number in OR PTC DCI. Then the entries can be entered into STIM and paid.
      2. If you do not find any other authorization, it means the authorization was supposed to be rejected in OR PTC DCI but was not. Do additional research in OA to see if the service plan ended or if a new voucher should have been created. Look at the provider’s credentials. If they expired the auth will not pull over. (Example: provider number expires 10/31/22, the auth that will pull over is the 10/9 to 10/22. Because the number expired in the middle of the next pay period, the system does not prorate, it just stops issuing.)
    2. If the authorization is in a status of 35, open the authorization and compare the time entries on the authorization to those in OR PTC DCI.
      1. If the entries match what is in OR PTC DCI, the authorization should be paid.
      2. If the entries do not match what is in OR PTC DCI, edit the time in Mainframe. Then the authorization can be put into 35 status once more and paid.
    3. If the authorization is in a status of 36, open the authorization and compare the time entries on the authorization to those in OR PTC DCI.
      1. If the entries match what is in OR PTC DCI, the authorization was paid. Clarify with the provider that they were not paid.
      2. If the entries do not match what is in OR PTC DCI, reach out to your voucher team to follow up to determine if an underpayment or overpayment needs to be submitted.
    4. If the authorization is in a status of 46
      1. If the entries match what is in OR PTC DCI, the authorization was paid. Clarify with the provider that they were not paid. To do this, you may need to do research to ensure the provider was paid under the correct voucher number.
      2. If the entries do not match what is in OR PTC DCI, reach out to your voucher team to follow up to determine if an underpayment or overpayment needs to be submitted.

Provider Reports They Were Underpaid

To troubleshoot the issue of a provider being underpaid, follow the same steps as Provider Reports They Have Not Been Paid to determine where the discrepancy in pay was.  

Provider Reports the Landline Won’t Let Them Clock In

If a provider calls in from their consumer’s landline and the landline phone number is not properly connected to the consumer’s Phone field on their profile in OR PTC DCI, then they will hear this message: “The phone number you are calling from does not match the phone number on the consumer record in DCI. Please call back from the phone number on record or call your local office for assistance. Goodbye.”

Please review transmittal APD-IM-22-033 for additional information about phone numbers in OR PTC DCI.

To resolve the issue:

  1. Confirm with the consumer that they have a landline phone or VOIP phone in their home.
  2. Navigate to the consumer’s profile in OR PTC DCI and check the phone number listed in the Phone field.
    1. If (000)-000-0000 or a number different from the consumer’s landline the provider is calling from is listed in that field, then update it to reflect the correct landline phone number. Once the phone number has been updated, the provider will immediately be able to clock in and out. To edit the phone number, see the Update Consumer Information section of the Profile Management Guide.
    2. If the consumer’s phone number is a landline and their provider was previously using it to clock in, but the phone number is now showing as (000)000-0000, please see APD-IM-22-033.
    3. If the phone number listed is correct, contact PTC Support at Support@odhsoha.oregon.gov for additional assistance.

Provider Reports Their Profile is Locked

There are several reasons that can result in a profile being locked, including the user typing the wrong password more than five times in a 24-hour period.

See 1.5.3 Managing User Profiles - Unlock a Profile.

In order to unlock someone’s profile, you must have the supervisor role over their assigned cost center.

After verifying the user’s identity in OR PTC DCI with last four of SSN, email address, prime/provider number (as there are multiple profiles sharing the same name), follow these steps to unlock their profile:

  1. Navigate to the provider, consumer, or CER’s profile in OR PTC DCI.
  2. Click Unlock under the Other Details column on the right.

Resources

For questions on Business Processes please reach out to: PTC.Support@odhsoha.oregon.gov.

Information on Homecare Worker or Mainframe Entry Processes can be found by clicking this link: DHS Staff Tools - Homecare Worker. For a full list of PTC business processes and learning materials, see the Staff Learning Materials Catalog.

  • No labels